Detailed dust removal
We remove settled dust from ledges, trim, vents, door tops, frames, light fixtures, and other horizontal surfaces where construction dust collects and keeps reappearing.
Post-construction cleaning in Elgin, Illinois
Post Construction Cleaning
Turn a finished build into a move-in-ready workspace. We remove fine dust, construction debris, adhesive residue, and film on glass, then detail the floors so your office or commercial space is ready for furniture, staff, and inspections.
✓Written scopes
✓Top-to-bottom cleaning
✓After-hours access
✓Elgin-based team
Construction turnover cleaning
Post-construction cleanup for Elgin commercial spaces
Post Construction Cleaning is different from routine janitorial work. After remodeling, tenant buildouts, or new construction, dust settles into HVAC returns, door frames, window tracks, baseboards, and textured surfaces. Floors are usually the biggest problem: fine grit gets ground in, paint and drywall mud harden at edges, and protective coverings leave adhesive behind.
Commercial Cleaning of Elgin provides commercial and office cleaning that is built for construction turnover. Our team works from a written scope, cleans top to bottom, and focuses on the areas that affect handover: detailed dust removal, window cleaning, and deep floor care so the space looks finished when the lights come on.
We are based at 223 Dundee Avenue, Suite 4 in Elgin, so we can schedule around GC timelines, after-hours access, and final walkthroughs without long lead times.
Detailed turnover scope
What we handle on post-construction jobs
Commercial floor care
We deep clean floors to remove grit and residue, then finish appropriately for the surface—for example, scrubbing and rinsing hard floors or vacuuming and extracting carpet as needed.
Window and glass cleaning
We clean interior glass, frames, and tracks and remove fingerprints, dust, and light film left from construction traffic so daylight reads clean during walkthroughs.
Adhesive and spot removal
We address tape residue, label adhesive, paint specks, scuffs, and dried splatter on floors and hard surfaces using methods that match the material.
Restroom and break area reset
We deep clean restrooms and break areas that saw trade use, with attention to grout lines, fixtures, partitions, and touchpoints before staff occupancy.
Final-ready presentation
We prioritize what inspectors, property managers, and tenants notice first: entry glass, corners and edges, floor sheen and clarity, and dust-free horizontal surfaces.
Site-specific cleaning
Commercial, industrial, and office cleaning: what changes after a build
A post-construction clean is a sequencing job. We start with dry removal of debris and loose dust, then move into detailed wipe-downs, and finish with wet cleaning and floor care. That order matters because wet cleaning too early turns fine dust into paste and spreads it.
For office cleaning after construction, we focus on finished materials that show every mark: interior glass, painted walls near floor lines, doors and hardware, cabinetry faces, and corners. For industrial cleaning spaces, we keep the scope practical and safety-driven: clear walk paths, remove grit and residue that can become slip hazards, and clean around fixed equipment per access rules.
If your building needs ongoing service after turnover, we can transition the space into a maintenance plan through our commercial cleaning services once the construction dust is fully under control.
How service works
Our Post Construction Cleaning process
Walkthrough and written scope
We confirm access, target date, and priorities—turnover, punch-list support, or final presentation. We note floor types, glass count, and areas with heavy trade traffic so expectations match the build conditions.
Safety and debris pass
We remove bagged debris and small leftover materials that are safe to handle, then set up a clean path for equipment. Anything requiring specialty disposal or presenting a hazard is flagged for the GC.
Dry dust removal, top to bottom
We HEPA-vacuum where appropriate and dry-dust higher surfaces first so particles do not fall onto finished floors. This includes trim, ledges, vents, and accessible horizontal surfaces.
Detail cleaning of touchpoints and fixtures
We wipe doors, frames, handles, cabinetry faces, counters, and restroom fixtures with the right chemistry for the material, paying special attention to edges where dust hides.
Window cleaning and glass detailing
We clean interior glass and remove smears and film so the space presents well under daylight and overhead lighting. Frames and tracks are addressed where access allows.
Deep floor care and final check
We deep clean floors with methods matched to the surface and soil. Then we do a final pass for corners, transition points, and any areas that need a second touch before handover.
Planning your turnover budget
How Much Does Post Construction Cleaning Cost in Elgin, IL?
Most Post Construction Cleaning for commercial spaces in Elgin typically ranges from about $0.25 to $0.70 per square foot, with heavier dust and floor restoration pushing higher. A smaller office suite may land around $400 to $1,200, while multi-room buildouts or larger floors with extensive glass and detail work can run $1,500 to $6,000+.
Price depends on square footage, level of dust and debris, number of restrooms, amount of interior glass, floor type—VCT, tile, polished concrete, or carpet—adhesive and paint spots, and whether crews can work after hours. The exact cost is confirmed after a walkthrough and written scope.
Request a CallbackTurnover details
What “move-in ready” looks like after cleanup
Tight handover schedule?
Prioritize inspection and occupancy areas first
If your GC schedule is tight, we can prioritize the areas needed for inspections and occupancy first, then finish the remaining zones as punch-list items wrap up.
Practical answers
Post-construction cleaning questions (commercial)
How soon can you clean after construction wraps up?
We can clean as soon as trades are finished in the areas you want addressed and the space is safe to enter. In practice, many Elgin turnovers work best with a staged approach: an initial rough clean after heavy work ends, then a final clean after paint touch-ups and flooring are complete so dust does not re-settle.
Do you provide commercial floor care for VCT, tile, carpet, and concrete?
Yes. We match the method to the floor type and condition, which is the key to getting construction grit out without leaving swirl marks or residue. During the walkthrough we identify the surface—for example, VCT versus LVT—and the kind of soil present so the equipment and chemistry are correct.
Can you remove tape residue, adhesives, and paint overspray?
Often, yes, as long as the material underneath can tolerate removal. We treat residue and splatter as a separate line item in the scope because the time varies widely based on how much is present, where it is located, and whether it has cured fully.
What do you need from the GC or property manager before the job starts?
Access instructions, confirmation that utilities are on—lights and water—and a clear understanding of what is still in progress. We also ask that leftover materials and tools are consolidated so we can clean floors and detail surfaces without working around active storage.
Do you clean inside HVAC ducts as part of post-construction cleaning?
No, duct interior cleaning is a specialized service and should be handled by a qualified duct-cleaning contractor. What we do handle is accessible dust on vents, returns, and exterior grilles, plus surrounding surfaces where dust settles during construction.
Is this the same as industrial cleaning?
Post-construction work can overlap with industrial cleaning, but the goal is different: turnover readiness and presentation rather than ongoing production support. If the space includes warehouse or light industrial areas, we can focus the scope on walkways, entrances, restrooms, and office areas so the building is safe and presentable for occupancy.
Plan your turnover
Get a written scope for your Elgin post-construction turnover
Tell us the address, square footage, and target handover date. Commercial Cleaning of Elgin will recommend the right level of deep cleaning, window cleaning, and floor care so the space is ready for walkthroughs and move-in.